PPE (Personal Protective Equipment) is a device designed to ensure the safety and to protect the health of a person engaged in a risky activity. Our products: clothing, shoes, gloves, safety glasses, ...

Wearing this safety equipment may, in some cases, be required by law. clothing or PPE is manufactured according to mandatory standards. The outfits and accessories classified EPI are grouped in three categories:

• Category I, which protects against superficial and reversible aggressions

• Category II, which protects against serious and potentially irreversible aggression

• Category III, which protects against fatal dangers.

We have a wide range of Personal Protective Equipment, to prevent shocks, falls or inhalation of gases dangerous to health. In our catalog, you will find:

• protective gloves (leather gloves, synthetic, disposable ...), to preserve your hands from cuts and burns, as well as the passage of electric current

• safety glasses (high visibility glasses, hoods or welding masks ...), to protect your eyes from possible projections or sunlight

• helmets (helmets, visors, caps ...), mandatory on construction sites and for all work at heights

• respiratory protection (disposable masks, reusable, integral ...), to stop the dust and the harmful emanations

• hearing protection (earplugs, noise-canceling helmets, etc.) to reduce the impact of noise pollution

• fall protection (safety harness, carabiners, bindings ...)

• protective clothing (anti-hot or anti-cold, high visibility ...)

• knee pads, etc.


Standards for clothes

EN 342: Protection against cold.

This standard establishes the criteria and methods of control of articles of clothing to protect against cold.

Each product is classified according to different values: the insulation index (Y) the air permeability (AP) and the possible impermeability (WP).

EN343: Certified products that protect against wind and weather.

This standard indicates the minimum values to be met by work clothes that can be used in all weathers.

An EN343 certified workwear protects you from rain and snow while breathing. It allows to evacuate moisture and perspiration from the body.

EN ISO 20471: Visible clothing.

The EN ISO 20471 certification is a standard for visible workwear.

An EN ISO 20471 garment ensures the safety of the employee who wears it, allows him to concentrate totally on his task, visible from day to night and from everywhere, including from the back, where it is difficult to orient himself. An EN ISO 20471 safety garment does not have any reflective or fluorescent material that can blind.

NF EN ISO 11611: Protection during welding.

The standard of writing the minimum requirements for protective clothing used during welding and related activities.

Class 1: RHYTI 24> 7s CLASS 2: 24> 16s. class 2 being the best protection.

NF EN ISO 11612: Protection against heat and flame.

This standard describes soft fabric garments designed to protect the wearer's body, except hands, from heat and / or flame. Out cap, leggings, head products, hands and feet.

NF EN ISO 14116: protection against heat and flame.

This standard specifies the functional requirement for materials, material combinations and protective clothing against limited flame spread to reduce the spread of ignition in the clothing, which would be a risk.

NF IEC 61482-2: Working under voltage.

Workwear against the thermal risk of an electric arc.

The IEC 61482-2 standard includes two test methods.

With method 1 (open arc test), the fabric and clothing are tested and the ATP / EBT value of the garment is determined.

With method 2 (taught test), the class of protection against electric arcs of fabric and clothing is determined using a controlled and forced electric arc; there are two classes. The class being the upper class offering better protection.

NF EN 1149-3 / 5 Protective clothing with electrostatic properties.

EN 1149-3: 2004 electric discharge

This standard describes the dissipation of the electrostatic charge of the clothing surface.

EN 1149-5: 2004 Performance and design, materials

This standard describes the requirements for

EN 13034 - Protective clothing against liquid chemicals

This standard describes the functional requirement for chemical protective clothing that provides limited protection against small amounts of liquid chemicals (Type 6 and PB equipment [6]). Chemical protective clothing with limited performance is intended for use in the event of potential exposure to light spatter, sprays of liquids or low-pressure, low-volume sprays.

ISO 15797 Your garment can be washed industrially

Industrial washing and treatment methods for testing work clothes. The standard specifies the test methods and equipment to be used to evaluate whether the materials of the workwear are suitable for industrial washing.


Standards for shoes


EN ISO 20345: EN ISO 20345 is a European standard for safety footwear that ensures your shoes, sandals and safety boots meet the requirements of their use in environments where safety is a priority high. All safety shoes are certified according to EN ISO 20345.

EN ISO 20347: The EN ISO 20347 certification is a European standard for unhulled footwear intended for professional use. This standard applies to shoes that have certified anti-slip characteristics, absorb shocks, facilitate breathing and enhance stability. The range of products includes shoes certified to EN ISO 20347 with the SRC standard, which certifies the highest standard for slip resistance safety.

Security class S1

Complete safety: Shoes, sandals and herringbone boots. Non-water repellent models.

Range: A wide range of shoes with different closure systems. Safety shoes with hulls and anti-slip and antistatic soles with closed heel.

Security class S1P

Complete safety: Shoes or high shoes with anti-perforation insert and shell. Non-resistant to water.

Range: Very wide choice. With or without protective toecap, different closure systems, many shoes and sandals and a pair of high shoes, several widths with models for women in different materials. All are very comfortable to walk.

Especially for: people who need particularly strong shoes, indoors, in summer or occasionally outdoors.

Security class S2

Complete safety: Safety shoes with hulls. Water repellent models.

Range: Safety shoes with hulls and anti-slip and antistatic soles with closed heel. Water repellent models according to EN ISO 20345.

Security class S3

Complete safety: Waterproof / waterproof shoes or uppers with anti-perforation insert and shell.

Range: Very wide choice. With or without protective toecap, different closure systems, low shoes and high shoes, with or without lining, waterproof and water resistant, in different materials. Some shoes have a Vibram® sole and can withstand temperatures up to 300 ° C. All are very comfortable to walk.

Especially for: people working outdoors, needing particularly strong shoes that can protect against the rain. Footwear with a protective toecap is particularly suitable for people who often work in a kneeling position.

Security class S4

Complete safety: Safety shoes with shells and anti-slip soles. Water repellent models according to EN ISO 20345.

Range: Hull boots, antistatic and shock absorbing soles. Non-slip soles certified SRC. Water repellent models.

Security class S5

Complete safety: Safety shoes with anti-perforation spacers and shells. Water repellent models.

Range: Safety boots with anti-perforation spacers, shells, and antistatic and anti-slip shock absorbing soles. Footwear with a depth of notching greater than 2.5 mm. Water repellent models according to EN ISO 20345.

ESD approved

Shoes marked with the ESD symbol prevent electrostatic charges by diverting static electricity from the body. This avoids damage to sensitive equipment such as electronic circuits.

New Account Register

Already have an account?
Log in instead Or Reset password